ACT Hose (Wire Enforced)
The Crushproof ACT Hose Wire Reinforced is a 4", 5", or 6" diameter, 11-foot garage exhaust hose designed for larger gas vehicles and diesel trucks in overhead vehicle exhaust removal systems.
Key features:
✓ Steel wire helix runs the full 11-foot length for added rigidity
✓ Available in 4", 5", and 6" inner diameters to accommodate high-volume exhaust from large engines
✓ Compatible with hose reels for overhead ceiling-mounted shop installations
✓ Compatible with standard connectors, elbows, Y-connectors, and adapters
Important usage notes:
• Designed for vertical exhaust removal systems only
• For floor-level or underground installations, use the Crushproof ACT Hose instead
• Must be paired with the correct tailpipe adapter for your vehicle application
| Information | |
|---|---|
| SKU : | ACT400W/11 |
| Diameter : | 4" |
| Hose Length : | 11' |
| Wire Length : | 11' |
 Download Spec Sheet |
|
WARNING: Vehicle Exhaust is extremely dangerous and potentially deadly. We always recommend that any system be properly engineered to meet the specifications of your application. If you are using our Crushproof system, we recommend that you use it with a fan and as an intermittent repair solution only, not to be run for long periods of time. This hose is to be used only with naturally aspirated 4 cycle engines running at an idle and under no load. We recommend keeping any run of hose as short as possible preferably 11' or under and sized to include ambient air to cool the exhaust temperatures. This hose is designed to handle frequent temperatures up to 400° and intermittent temperatures to 600°. When using Crushproof hose for the first time, watch closely to verify that the exhaust is exiting the building as designed. IF YOU SEE ANY EXHAUST COMING BACK INTO THE SPACE, THE HOSE IS NOT BEING USED PROPERLY. TURN THE VEHICLE OFF IMMEDIATELY AND CALL OUR EXPERTS.