Flarelock Hose
The Crushproof Flarelock Hose is a 2-inch diameter, 11-foot garage exhaust hose (SKU: FLT200) designed for vehicle exhaust extraction in automotive shops and garages.
Key features:
✓ Interlocking male/female ends allow two or more hoses to connect end-to-end without adapters or tools, extending total length as needed
✓ Compatible with standard connectors, elbows, Y-connectors, and adapters
✓ Crushproof flexible construction resists kinking and physical damage
Important usage notes:
• A portable exhaust fan is required for hose runs longer than 10 feet
• Must be paired with the correct tailpipe adapter for your vehicle application
| Information | |
|---|---|
| SKU : | FLT200 |
| Diameter : | 2" |
| Length : | 11' |
 Download spec Sheet |
|
WARNING: Vehicle Exhaust is extremely dangerous and potentially deadly. We always recommend that any system be properly engineered to meet the specifications of your application. If you are using our Crushproof system, we recommend that you use it with a fan and as an intermittent repair solution only, not to be run for long periods of time. This hose is to be used only with naturally aspirated 4 cycle engines running at an idle and under no load. We recommend keeping any run of hose as short as possible preferably 11' or under and sized to include ambient air to cool the exhaust temperatures. This hose is designed to handle frequent temperatures up to 400° and intermittent temperatures to 600°. When using Crushproof hose for the first time, watch closely to verify that the exhaust is exiting the building as designed. IF YOU SEE ANY EXHAUST COMING BACK INTO THE SPACE, THE HOSE IS NOT BEING USED PROPERLY. TURN THE VEHICLE OFF IMMEDIATELY AND CALL OUR EXPERTS.